İ  |  English
                  Switch Series
                  Hood panel
                  Appliance control panel
                  Water Controller
                  Oven Controller
                  New product
                  Production equipment
Contact: Mr. Zhao 
M.B:+8613605858620 18005858620
E-mail:jc@szjcdz.com.cn
M.B:+86 13605855063
Tel:+86-0575-83507398
Fax:+86-0575-83507397
Q      Q1264186966
Current position: Home > Products
 

H11 Specification

1Basic parameters

 Project

 Specification

 Operating Voltage

Operating voltage switch board main chip: +3.3 V - +5.5 V, +5 V DC  voltage generally used as the standard operating voltage, error 5%

Power board voltage: Input voltage AC 220V, output DC voltage +12 V and +5 V;

+12 V DC voltage for the relay; +5 V DC voltage supply switch board controller chips work, the error is 5%

Lighting voltage is AC220V

 Operating Current

 Switch board working current I Q 200mA
  Power board working current I Q 500mA

 Dimensions

 See photos

2Function Description

Power key: Press the power button once , the display shows the power mark , it means that the switch into standby ; regardless of what kind of fan is in working condition long press the power button for 3 seconds to enter Beijing hour setting mode, this time by adding keys and minus keys to adjust the hour ; press the power button again will enter Beijing minute setting mode, the cursor can be reduced by adding keys and keys to adjust the minutes ; setting time to complete five seconds after exit time setting.

Minus key : In standby mode , this button for continuous operation at high speed - medium - low - neutral - high in cycles .

plus key : In standby mode , this button for continuous operation at low speed - medium - high - neutral - low in cycles .

Lighting key: lighting control independently controlled from the power button , press the key once the light turn on lighting , switches also enters the standby state ; press lighting and once lighting off.

Delay key : In standby mode , press the key to enter the 3 minutes delay default low delay time , then the delay time is flashing , can be reduced by adding keys and keys to adjust the Delay Time 0 - 9 minutes cycle.

3Dimension Data

Switch display panel
Physical map

Key Description Figure

PCB Layout

Switch top view Dimensions

Switch back top view

Power board

Power Board physical map

PCB Layout

Dimensions


4All kinds of cable

Power strip with switch cable between the display panel

Lighting cable

Fan cable

Copyright (C)  Shengzhou Jincheng Electronics Co., Ltd.
东北老妇爽的大叫天天看A片,东北老女人高潮粗暴对白,东北老富婆高潮大叫对白